The XDI is the latest ignition system from Electromotive. This new, configurable ignition system uses a controller with one or two Direct Fire Units (DFU) to power up to 14 different engine configurations. The XDI uses Electromotive’s patented direct fire ignition and it’s high-resolution crank position sensing to produce the most accurate and most powerful ignition available in the aftermarket.

The Direct Ignition Advantage
A "Direct Fire" ignition fires the spark plugs directly from the coils and not through a distributor cap and rotor. This is accomplished by using multiple coils, each with two spark terminals. The coil terminals are connected to the spark plugs, allowing one cylinder to fire on compression while its companion cylinder fires simultaneously on exhaust. Open spark gaps in the rotor and cap are eliminated, making wear and moisture problems a thing of the past.
What sets XDI apart is the ability to charge multiple ignition coils at the same time. This increased dwell time means that full spark energy is available over the entire RPM range (up to 9600 at 12 volts). Unlike Capacitive Discharge systems that only put out one very short spark, the XDI puts out a full energy, long burning spark at your highest and most critical engine speeds. Long burn times assure effective burning of even lean fuel mixtures.
The brain of the XDI includes dual digital microprocessors using patented spark algorithms (patent number RE 34,183), which takes the electrical signal from the crankshaft sensor, identifies the two missing teeth and then keeps track of the remaining 58 teeth. The XDI determines engine speed and computes the spark advance from your knob settings. Setting the timing advance curve is a simple task that anyone can understand.
In addition to synchronizing and firing the plugs at the correct advance angle, the XDI also computes the exact dwell to produce 9 amps of coil current. Coil charging is measured dynamically, so changes in RPM, battery voltage, or temperature are all accounted for on every spark. This corrects any errors that are caused by battery voltage or coil temperature changes and insures maximum spark energy.

XDI delivers more power because:

• Spark timing is precisely controlled under all conditions, including rapid engine
  acceleration
• Crank trigger eliminates spark scatter due to gear lash and timing chain stretch
• Accurate spark timing allows sustained engine operation closer to peak power
  timing
• 100% spark energy to 9600 RPM on 6 cylinder and 12,000 RPM on 4 & 8 cylinder applications (at 12 volts)
• Operation up to 20,000 RPM (at higher battery voltage)
• Long, 1000+ microsecond spark duration - 60+° duration at 10,000 RPM!
• Built-in timing computer and rev limiter
• No power draining magnetos or distributors to drive
• No moving parts to wear out or replace
• Built-in timing monitor lets you measure the advance with a voltmeter
• Options include: backup sensor, dual rev limiter, and remote timing control
• Check out the manual here